Keebio (Not-So) Weekly Roundup for June 15, 2026

Back with some updates on where things stand across a few projects. Progress is happening on multiple fronts, though the website has been pulling most of the attention lately.

Spotted in the Wild!

Maybe you'll draw some inspiration from what you see in the following builds:

Updates

Sinc LM

PCBs and aluminum cases for the Sinc LM have been ordered. All the silicone tray liners and switch plates have arrived. Production samples for the PCBs have been approved, which typically means about 2 more weeks for production to be complete. More to share once they arrive.

Chiri CE

We've received the PCBs for Chiri CE, and right now, we're preparing the cases for it to get it ready for release. We expect to get it out there in the next week or two.

Afternoon Breeze

Good news on the Afternoon Breeze: the initial batch of MX and Choc Rev. 1.4 PCBs has arrived, and the case design adjustments are looking good. There are two things left to sort out before a proper release. The EZmate battery connector needs to be relocated, as it currently sits on top of the area where the battery is meant to sit. The PCB edges also need a small trim to fit cleanly in the case. In the meantime, an initial test batch of PCBs and cases will go up for sale shortly, shipped without the EZmate connector.

A revised version of the PCB design is in progress that shrinks up the outer perimeter of the PCB.

Quefrency LM

The 3D-printed budget version of the Quefrency LM still needs to be fully tested out. Other projects have been taking priority, so that testing hasn't happened yet.

Quefrency Rev. 7

Nothing new to report on the Quefrency Rev. 7 this time around. Other projects are still ahead of it in the queue.

Other Updates

Website

Most of our time right now is going into the website. We're pushing to get things across the finish line, so product and project work has taken a back seat for the moment.

Here's a bit of a peek at our revised setup for picking out parts for keyboards: